“The MK10 Structural Slab Foundation
is the GOLD STANDARD of foundations!”
David Lehman – P. Eng Consulting Engineer

MK5 Structural Foundations Engineer of Record
Inspection and certification of project on completion.
844-747-7479

Ships & installs virtually anywhere! (High static water, rock, conservation areas)
The strength of the MK5 comes from the size of the bar and its position in the slab, not the thickness of concrete.

How It Works
How do Pre-Engineered MK5 Structural Slab Foundations work with Pre-Engineered Steel Buildings?

Pre-Engineered MK5 Foundations are designed and priced at the same time as the building, waiting for Structural drawings then passing them on to a foundation engineer are over, we design the foundation now, with the building. Adjusting the frame spacing and wind brace positions on the building will lower the upload and down-load reactions on the slab, maximizing building with foundation efficiency.

The MK5 Foundation designed with your steel building will generate the most cost-effective project price possible, Right Now! MK5 Structural Foundations are designed by Risa structural analysis and design software, the foundation is designed and sent to drafting in minutes. The MK14 Structural Slab Foundation resolves every engineering issue facing a conventional frost wall foundation.

DO-IT-YOUSELF – MK5 kits are designed for first time buyers, detailed manuals and inspection certificates included.

Pre-Engineered – Beam Bar Design and Permit Drawings provided by Risa Structural Design software, fast and dead-on accurate.

Pre-Fabricated – Beam Bars positioned with-in 1/4″ of Engineering specification.

HEAT SLABS – An MK5 specialty, our structural slabs are not cut, entombing the Pex pipe in concrete forever.

SITE PREPARATION – Environmental sensitive, simply excavate the organic soils, replace with a gravel drain base level and compact.

CRANE BUILDINGS – Precision Machine Shops, Mines, anywhere big loads are required. The 10, 12 and 14” thick MK5 Slabs reveal the true benefit of the two-way reinforced concrete action, combined with 150 grade 170-220 kip high yield stress bars in an exterior beam format, which carry 180, 000 to 210,000 Lb working load. High yield post-tension bar main beam design, top and bottom, based on a suspended slab, inverted, combined with 150 grade post-tension bar in a structural slab grid creating a 2-way reinforced concrete, as a structural foundation supporting superstructure loads, on ground.